Defect notice repairs and certificates

Got an electrical defect notice?

Getting a defect notice from your electricity distributor can feel worrying, but it's a common part of keeping Melbourne homes safe. We do the repair, handle the paperwork and send you your Certificate of Electrical Safety, so you can get your power back on and move on.

  • Same day or 24 hour response
  • Certificate supplied for you
  • On-the-spot quote, no hidden costs
Contact us
A complete Jemena electrical defect notice with the customer's details hidden
A real defect notice. Yours will look similar.

Defect notices

What your defect notice means

A defect notice means your distributor has found something on your property's side of the connection that must be fixed by a licensed electrician before they're satisfied it's safe.

Common defects

Why homes get defect notices

Most notices come down to a handful of issues: damaged or outdated meter boxes, faulty overhead or underground consumer mains, unsafe switchboards, and unlicensed or DIY electrical work.

Not sure what yours means? See the common defects that appear on notices and how each one gets fixed.

The process

How we get your defect notice cleared

You get a Certificate of Electrical Safety by having a licensed electrician do the work. Here's how it works with us, from the first call to the certificate in your hands.
  1. 01

    Get in touch

    Call or send the form. A photo of the notice or the job helps us understand it before we arrive.

  2. 02

    We visit and quote

    We attend same day or within 24 hours and quote on the spot before any work starts.

  3. 03

    The work is done

    We carry out the repair or installation and test it.

  4. 04

    Prescribed work is inspected

    If the work is on the prescribed list, it's inspected by an independent Licensed Electrical Inspector.

  5. 05

    Your certificate is supplied

    You receive your Certificate of Electrical Safety.

Deadlines

What happens if you don't fix it?

Your notice has a deadline. If the defect isn't fixed in time, your distributor can disconnect the power to your property until the work is done and certified. Read what to do about an electrical defect notice for the full picture, including who pays and what your distributor expects.

Why use us

A local contractor that specialises in this work

About us

Who does the work

S Leitch Electrical is a licensed, registered electrical contractor based in Spotswood that specialises in defect notice repairs and Certificates of Electrical Safety. We handle the repair, testing and certificate as part of the same job.

Licensed and registered electrical contractor

No surprises

On-the-spot quote, no hidden costs

Every job is different, so it's quoted on site before any work starts, with no hidden costs. We explain what's involved and the price we give you is the price you pay.

Coverage

All Melbourne suburbs

Based in Spotswood VIC 3015, we cover homes and properties across Melbourne, including Powercor, Jemena, CitiPower and United Energy areas.

Not sure who your distributor is? It's printed on your notice. See what each distributor expects after a defect notice.

New meter box installed on a weatherboard house
New meter box installed
Electrical connection repair on a weatherboard house
Connection repair on a weatherboard home
Exterior switchboard next to a solar inverter
Switchboard and solar inverter

Got your notice handy? Send it through and we'll take it from there.

Get a quote

Certificates explained

About the Certificate of Electrical Safety

Everything you're required to have, who can issue it and how long it takes, in one place.
What is a Certificate of Electrical Safety?

A Certificate of Electrical Safety is a legal document issued by a Registered Electrical Contractor or licensed electrician to record the details of the electrical work they've performed. All electrical installation work in Victoria needs one.

Is it the same as an electrical compliance certificate?

Many people call it an electrical compliance certificate or an electrician certificate of compliance. In Victoria, the official name is the Certificate of Electrical Safety. Other states use different certificates, so if you're reading advice from interstate, check it applies here.

When do you need one? Prescribed work

You need one for every electrical installation job. Prescribed work includes consumer mains (the cables that bring power from the street connection to your meter box), main switchboards, meter boxes, earthing systems and renewable energy systems. It must be inspected by an independent Licensed Electrical Inspector before it's switched on.

When do you need one? Non-prescribed work

Covers things like lights, power points and air conditioning. No independent inspection is required.

Lost your certificate or never got one?

You can usually find it online. Electronic certificates issued from July 2019 can be found through Energy Safe Victoria's online search portal. For older certificates, Energy Safe Victoria takes a search application by email with proof of address.

If you never received a certificate, you can lodge a complaint with Energy Safe Victoria within three years of the work being completed, or have another contractor inspect and certify the work.

See Energy Safe Victoria's guide to Certificates of Electrical Safety for consumers for the search portal and how to apply.

Who's allowed

Who can issue one?

Only Registered Electrical Contractors and licensed electrical workers can buy and complete Certificates of Electrical Safety. A contractor can't refuse to issue one for work that needs it.

Pricing

How much does it cost?

Contractors may charge the legislated certificate purchase amount plus an administration fee they set. The repair work itself is usually the bigger cost, and it depends on the job. We quote on the spot before starting any work, with no hidden costs.

Timeframes

How long does it take?

For prescribed work, the certificate must be provided within 4 days of the work being completed, once it has been inspected. For non-prescribed work, it must be provided within 30 days.

Many defect notice repairs involve parts on the prescribed list, such as meter boxes and consumer mains. That's why our process above includes the independent inspection step where it's needed.

Utility bucket truck repairing an overhead electrical connection on a Melbourne street
Defect repair in progress

Questions

Certificate of Electrical Safety FAQs

What is a Certificate of Electrical Safety?

It's a legal document issued by a Registered Electrical Contractor or licensed electrician to record the details of the electrical work they've performed. In Victoria, all electrical installation work needs one.

How do I get a Certificate of Electrical Safety?

Have the work done by a Registered Electrical Contractor or licensed electrician, who completes and supplies the certificate. Call us or send an enquiry and we'll quote on the spot, do the work and supply the certificate.

Where can I get a Certificate of Electrical Safety?

Only from the Registered Electrical Contractor or licensed electrical worker who did the work. We cover all Melbourne suburbs, across Powercor, Jemena, CitiPower and United Energy areas.

How much does a Certificate of Electrical Safety cost?

Contractors may charge the legislated certificate purchase amount plus an administration fee they set. The repair work is usually the bigger cost, so we quote on the spot before starting, with no hidden costs.

Is an electrical compliance certificate the same thing?

In Victoria, yes. Electrical compliance certificate and electrician certificate of compliance are common names for what is officially called the Certificate of Electrical Safety. Other states use different certificates.

Who can issue a Certificate of Electrical Safety?

Only Registered Electrical Contractors and licensed electrical workers can buy and complete certificates. A contractor can't refuse to issue one for work that needs it.

How long does it take to get one?

For prescribed work, the certificate must be provided within 4 days of the work being completed once it has been inspected. For non-prescribed work, it's within 30 days. We attend same day or within 24 hours.

Can I get a copy of an old certificate?

Electronic certificates issued from July 2019 can be found through Energy Safe Victoria's online search portal. For older certificates, Energy Safe Victoria takes a search application by email with proof of address.

Which areas do you cover?

We're based in Spotswood and cover all Melbourne suburbs, across Powercor, Jemena, CitiPower and United Energy areas.

Get in touch

Get your defect notice or certificate sorted

Send the form and we'll get back to you same day or within 24 hours.

If you can, include what's on the notice and the deadline date. A photo of the notice helps too.

Your details are only used to respond to your enquiry. See our privacy policy.

Get a quote